ATC-1000M (TCP/IP to UART) Step by Step Guide -- (a Gizduino TCP/IP Shield)

Here is a E-Gizmo TCP/IP Shield which is powered by ATC-1000M, which will be covered in this post.



(the green circle shows that the RX and TX are shorted, for loopback testing)

Here is the procedure from setting the static IP up to hyperterminal loopback testing. (Connection: PC —LAN cable–ATC1000M)

ATC-1000M Loopback Setup and Test Video


Here is a C# test program:



Here is the complete source code in C#.

If the ATC-1000M is planned to be used over wifi, check the IP Address and Gateway of the ATC-1000M via the web configuration and make the necessary adjustments (if needed).